Craft Foam Sheets & Blocks – A.C. Moore
Our 12″ × 18″ craft foam sheets bring endless creative possibilities to your workspace. Each pack includes 10 vibrant colors—red, blue, yellow, green, orange, purple, pink, black, white, and brown—giving you immediate variety for any project. The 2mm thickness strikes an ideal balance between flexibility and structure, letting you cut intricate shapes with scissors or craft knives while maintaining clean edges.






Choosing the right thickness determines whether your project bends gracefully or stands rigid under its own weight. Our 2mm sheets flex enough for curved costume pieces—think knight’s gauntlets or superhero chest plates—while holding their shape once glued into position. If you’re layering multiple sheets to create dimensional wall art or puppets, this thickness stacks without adding excessive bulk.


Cutting techniques for clean edges
Sharp blades prevent tearing
Dull scissors crush foam fibers rather than slicing them, leaving ragged edges that show up under close inspection. We recommend replacing craft knife blades after every three to four sheets, especially when cutting intricate curves or fine details. Rotary cutters work beautifully for straight lines if you secure the foam to a self-healing mat with painter’s tape—the rolling action produces factory-smooth edges in a single pass.
Hot-wire tools for sculpting
When carving polystyrene blocks, a hot-wire cutter melts through material with zero mechanical pressure, eliminating the crumbling and dust that hand tools create. We use this method in our workshop demonstrations because it leaves glossy, sealed edges that don’t require sanding. Just remember to work in a ventilated area—the melting process releases fumes that need fresh air circulation.

Adhesive options and bonding tips
Standard white craft glue holds foam sheets together for lightweight assemblies, but the bond takes fifteen to twenty minutes to set fully. We prefer tacky glue when speed matters—it grabs within seconds and dries clear, making it ideal for classroom projects where kids lose patience during long drying waits. Hot glue guns create instant bonds strong enough for wearable costumes, though the heat can melt thin foam if you linger too long in one spot.
For permanent installations like wall-mounted letters or outdoor decorations, contact cement provides industrial-strength adhesion that weathers temperature swings and humidity. Apply a thin coat to both surfaces, let it dry until tacky, then press firmly. Seasonal projects for holidays and events often benefit from spray adhesive because it distributes evenly across large areas without lumps or visible glue lines. Test any adhesive on scrap foam first—some formulas contain solvents that dissolve polystyrene on contact.
What makes our foam sheets versatile
More foam crafting essentials
Customer reviews




Common questions about craft foam
Yes, acrylic paint bonds directly to our foam sheets without primer. For best results, apply thin coats rather than one heavy layer—thick applications can crack along fold lines when the material flexes. Let each coat dry fully before adding the next, usually fifteen to twenty minutes depending on humidity. If you’re painting dark colors over light foam, two coats typically deliver opaque coverage.
EVA foam sheets are flexible, tear-resistant, and ideal for projects that bend or wrap around shapes like costumes and masks. Polystyrene blocks are rigid and meant for carving three-dimensional forms such as sculptures, architectural models, or floral arranging bases. EVA accepts adhesives and paints uniformly, while polystyrene requires a protective sealer before spray painting to prevent chemical melting.
Store foam sheets flat in a cool, dry location away from direct sunlight and heat sources. Stack them horizontally with acid-free tissue between layers to prevent color transfer. Never roll foam sheets into tubes—this causes permanent creases that show through paint and adhesive. If sheets arrive slightly curled from shipping, place them under a flat weight for twenty-four hours to restore their original shape.
Our foam sheets and adhesive shapes are non-toxic and meet ASTM safety standards for children ages three and up. The material contains no latex, phthalates, or heavy metals. We recommend adult supervision when children use scissors or craft knives to cut foam, but the material itself poses no inhalation or skin contact hazards during normal crafting activities.
Fabric glue or flexible adhesives like Aleene’s Fabric Fusion create strong, washable bonds between foam and fabric. Hot glue also works well for costume construction, though the heat can melt thin foam if you hold the gun in one spot too long. Avoid super glue and epoxy—they dry rigid and crack when fabric stretches. For temporary attachments like removable costume pieces, double-sided fabric tape provides secure hold without permanent bonding.
EVA foam withstands outdoor conditions if you seal it with two coats of UV-resistant polyurethane or outdoor-rated clear coat. Unsealed foam fades in direct sunlight within a few months and can degrade from moisture cycling. Polystyrene blocks are not recommended for permanent outdoor use—temperature swings cause expansion and contraction that leads to cracking. For temporary outdoor displays lasting a few weeks, both materials perform adequately with proper sealing.
Our 2mm foam sheets are the sweet spot for cosplay armor—they’re thick enough to hold shape and support paint but flexible enough to bend around body contours. For larger structural pieces like shoulder pauldrons or chest plates, layer two sheets together with contact cement for added rigidity. If you need extremely rigid armor pieces, our 6mm sheets provide the stiffness required for freestanding components, though they’re heavier and less forgiving during heat-forming.






