How to Frame Artwork at Home: A Complete Guide to Choosing the Right Materials and Assembly Techniques

How to Frame Artwork at Home: A Complete Guide to Choosing the Right Materials and Assembly Techniques

Framing artwork yourself gives you complete creative control while saving the cost of professional services. Whether you’re preserving a family photo, displaying a print, or showcasing original art, understanding the fundamentals of how to frame artwork ensures your piece looks gallery-ready and stays protected for years.

At A.C. Moore, we’ve helped thousands of customers bring their framing visions to life. This guide walks you through every decision—from selecting the right frame style and mat configuration to choosing protective glazing and assembling everything securely at home.

Selecting the Right Frame for Your Artwork

The frame’s visual weight should complement your artwork without overwhelming it. Thin metal frames work beautifully with modern prints and photography, while ornate wood frames suit traditional paintings and portraits. Consider the room’s existing décor—a frame that clashes with your wall color or furniture style will draw attention away from the art itself.

Frame depth matters as much as style. Standard frames accommodate artwork up to 1/8 inch thick, but canvas paintings and textured pieces need deeper profiles. Measure your artwork’s actual thickness before shopping, including any backing board you plan to add. Our frame assembly kits include spacers and hardware sized for common depth requirements, which eliminates guesswork during the build.

Wood frames offer the widest range of finishes, from raw maple to distressed black, and they accept stain or paint if you want a custom look later. Metal frames provide a crisp, minimalist edge that suits contemporary spaces, though they typically offer fewer color choices. Both materials are equally durable when properly constructed—your decision comes down to aesthetic preference and the artwork’s tone.

Choosing and Cutting Mat Boards

A mat board creates visual breathing room between your artwork and the frame, preventing the piece from feeling cramped. Standard mat width runs 2 to 3 inches on all sides, though larger pieces often look better with wider borders. An off-center mat—slightly wider at the bottom than the top—creates a subtle optical balance that professionals use to counteract the eye’s tendency to see perfectly centered mats as bottom-heavy.

Mat color should enhance the artwork’s palette without competing for attention. White and off-white remain the most versatile choices, but colored mats can pull out accent tones in the piece. If you’re unsure, hold sample mat boards against your artwork in the lighting where the finished frame will hang—colors shift dramatically between store fluorescents and home daylight.

Beveled Edges and Window Cutting

The mat’s beveled edge—cut at a 45-degree angle—adds a professional finish that flat edges can’t match. Most home mat cutters produce clean bevels with practice, though the first few attempts may show ragged edges. Use a sharp blade and make one firm pass rather than multiple light scores. The picture mat technique has remained largely unchanged for decades because the geometry works: the angled reveal catches light and creates depth.

Glazing Options: Glass Versus Acrylic

Standard glass offers excellent clarity and scratch resistance at the lowest cost, but it’s heavy and shatters on impact. It works well for frames that will hang permanently in low-traffic areas. UV-filtering glass blocks up to 99% of harmful ultraviolet light, which prevents fading in valuable prints and watercolors—the added cost is worthwhile for irreplaceable pieces.

Acrylic glazing weighs half as much as glass and won’t shatter if dropped, making it the safer choice for children’s rooms and high-traffic spaces. It scratches more easily than glass, so handle it by the edges and clean it only with microfiber cloths. Museum-grade acrylic combines UV protection with superior clarity, though the price jumps significantly.

Non-glare glass and acrylic reduce reflections through etched surfaces, which diffuses light but also softens the image slightly. They’re best for frames in bright rooms or opposite windows where standard glazing creates distracting glare. For most home applications, regular glass or acrylic strikes the right balance between cost and performance.

Glazing Options: Glass Versus Acrylic

Assembly Steps and Hanging Hardware

Lay out all components before assembly: frame, glazing, mat, artwork, backing board, and mounting hardware. Clean the glazing thoroughly—trapped dust becomes permanent once the frame is sealed. Place the glazing in the frame first, then the mat, then the artwork centered in the mat’s window. Add a rigid backing board behind the artwork to prevent warping.

Secure everything with glazier points or framing clips inserted every 4 to 6 inches around the perimeter. These metal fasteners hold the stack tight against the frame’s rabbet without damaging the artwork. For picture frames that will hold lightweight prints, points are sufficient; heavier artwork needs additional support from framing clips or tabs.

Sealing and Hanging

Seal the back with kraft paper or framing tape to keep dust out and give the frame a finished look. Attach hanging hardware appropriate to the frame’s weight—wire and D-rings for pieces over 5 pounds, sawtooth hangers for lighter frames. Position D-rings one-third of the way down from the top of the frame, not at the midpoint, so the wire pulls the frame tight against the wall rather than letting the top tilt outward.

Assembly Steps and Hanging Hardware

Preservation Tips for Long-Term Display

Keep framed artwork out of direct sunlight, even if you’ve used UV-filtering glazing. Prolonged exposure fades pigments and yellows paper, particularly in watercolors and photographs. Indirect natural light or dedicated picture lighting provides visibility without the damage.

Avoid hanging frames in bathrooms or kitchens where humidity fluctuates. Moisture warps paper, encourages mold growth, and separates adhesives. If you must display art in high-humidity areas, use sealed frames with silica gel packets inside to absorb excess moisture.

Inspect your framed pieces annually for signs of deterioration: discoloration, buckling, or condensation inside the glazing. Catching problems early prevents permanent damage. Our framing services team can reframe pieces that show wear, or you can disassemble the frame at home and replace damaged components while keeping the original frame and mat intact.

Bringing Your Framing Project Together

Learning how to frame artwork at home transforms how you display and preserve the pieces that matter to you. Each decision—frame style, mat width, glazing type—shapes the final presentation, and hands-on assembly gives you control over every detail. With quality materials and a methodical approach, your DIY frames will rival professional results.

Start with a single project to build confidence, then expand to more complex pieces as your skills develop. The techniques covered here apply whether you’re framing a child’s drawing or a gallery-quality print. At A.C. Moore, we stock everything you need to frame artwork with professional quality and personal style.

Notes

Measure the artwork’s height and width at its widest points, then add the desired mat border on all sides. If you want a 2-inch mat, add 4 inches to both dimensions. For frameless mounting, measure the exact artwork size. Always round up to the nearest eighth of an inch—frames fit standard increments, and a slightly loose fit is easier to adjust than a too-tight squeeze.

Yes, though mats serve important functions beyond aesthetics. They create an air gap between the artwork and glazing, which prevents moisture damage and sticking. For pieces that don’t need mats visually, use spacers or a hidden liner to maintain that gap. Canvas paintings rarely need mats since the stretched canvas already holds the surface away from the glazing.

Use UV glazing for original artwork, limited-edition prints, photographs, and any piece with sentimental or monetary value. Inexpensive mass-produced prints don’t justify the cost—standard glazing is fine. If the piece will hang near a window or in bright light, UV protection becomes more critical regardless of the artwork’s value, since fading accelerates with sun exposure.

A mat cutter or sharp utility knife, metal straightedge, glazier points, point driver or needle-nose pliers, kraft paper or framing tape, and hanging hardware cover most projects. A miter saw or frame joiner is necessary only if you’re cutting frame molding yourself. Pre-cut frames and mats eliminate the need for specialized cutting tools.

Work slowly and remove backing components in reverse order of assembly. Pull glazier points straight out with needle-nose pliers rather than prying sideways. If the artwork is stuck to the mat or glazing, don’t force it—gently warm the area with a hairdryer on low to soften adhesives. Tape residue can often be lifted with a rubber cement pickup or archival tape remover.

Prioritize the artwork—the frame should enhance the piece, not coordinate with your sofa. Neutral frames in black, white, or natural wood tones work with nearly any artwork and adapt when you redecorate. If you want a bolder frame color, pull it from a secondary tone within the artwork rather than the dominant color, which creates harmony without redundancy.